Feeding belt for the cardboard bales with impact wall
Feeding belt for the cardboard bales with impact wall

Bale opener and bale dewiring system, yoc 2015, only approx. 3,500 operating hours, throughput approx. 50 bales per hour, with weighing system

Technical data  bale opener and dewiring line with weighing system

 

Bale feeding belt, pos. 1:

Belt length 11,000 mm

Width between side parts 1,460 mm

Belt width 1,200 mm

Max. Load 7,000 kg

Conveying speed 0.2 m/second

Drive power 3 kW

Pitch of idlers 250 mm

Side wall height in feed area 70 mm

Side wall height impact wall 1,000 mm

Feed height 1,800 mm

 

Industrial weighing system for the bale feeding belt (additional equipment):

Weighing terminal type IT1 Ethernet

8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each

Preload of the system 5,000 kg

 

Feed belt to bale opener and dewirer, pos. 2:

Belt length 9,500 mm

Width between side parts 1,460 mm

Belt width 1,200 mm

Max. Load 6,000 kg

Conveying speed 0.25 m/second

Drive power 9 kW

Pitch of idlers 250 mm

Side wall height 800 mm

Pitch 13

 

Bale opener and dewiring station, pos. 3:

Type B/E 3213

Year of manufacture 2015

Belt length 2,300 mm

Width between the side parts 1.600 mm

Belt width 1,200 mm

Max. Load 1.500 kg

Conveying speed 0.25 m/second

Drive power 1.5 + 1.5 + 1, 5 + 2.2 + 30 kW

Height of side panels 800 mm

Blade lowering speed 70/40 mm/second

Hydraulic pressure 160 bar

Pneumatic pressure 6 bar

Height of the system 5,700 mm

Bale length dimensions min. 1,000 mm, max. 2,200 mm

Bale width dimension min. 750 mm, max. 1,200 mm

Bale height dimension min. 750 mm, max. 1,200 mm

Material qualities provided OCC department stores' paper, mixed paper, punching waste, label waste, beverage cartons

Wire diameter 3 - 4 mm

Operating hours approx. 3,500 hours

Throughput capacity approx. 50 bales/hour

Total power consumption approx. 37 kW

Control system Siemens S7-300

Operator panel Siemens HMI TPU1200 in 12".

 

Wire reel for wire winding, pos. 4:

Drive power 5,5 kW

Pneumatic working pressure

 

Discharge belt (steel plate conveyor) to shredder, pos. 5:

Length of infeed belt 13,500 mm

Length of ascending belt 11,600 mm

incline 25

Height of side wall 1,200 mm

Width between side walls 1,500 - 1,850 mm

Max. Load per linear metre 700 kg

Max. Total load 11,000 kg

Belt speed 0.2 m/second

Transfer height to the shredder 5,000 mm

Max. load Max. load 11,000 kg

Drive power 2 x 9 kW

 

Condition of the baler

The complete plant was used exclusively in trial operation for opening and de-wiring bales of pressed OCC paper and beverage cartons. After a short time, the project was discontinued and the system was no longer used. The conveyor technology and the bale opener and dewiring unit are really in a very good condition. As you can see from the pictures, there is almost no wear visible. The production line is ready for immediate use and available at short notice. The new price of the plant was 597.000,- €.

 

Comments:

The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available in German language.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.