




















Moving floor bunker, 85 m³ volume, with dosing drum, incl. trough chain conveyor, yoc 2016, only 3,500 operating hours
Technical data moving floor bunker 85 m³ with dosing drum: |
Manufacturer METRANS AB |
Type MFB-85-6 |
Year of construction 2016 |
Operating hours approx. 3,500 hours |
Bunker dimensions inside 5,850 x 3,988 x 3,772 mm (l x w x h) |
Bunker volume 85 m³ |
Hydraulic unit for moving floor 22 kW, 180 bar, 250 L hydraulic oil |
Push rod width 400 mm |
Wear plate thickness on the push rods 6 mm |
Number of push rods 10 pieces |
Number of hydraulic cylinders 10 pieces |
|
Dosing drum 800/4000: |
Useful width 4,000 mm |
Diameter 800 mm |
Drive power 22 kW |
|
Performance data all machines before the bunker: |
Max. Volume flow 270 m³/hour |
Conveying capacity 13.5 t at a bulk density of 0.05 t/m³ |
Conveying capacity 27.0 t at a bulk density of 0.10 t/m³ |
|
Performance data for all machines after the bunker: |
Max. Volume flow 280 m³/hour |
Filling time 6 min. |
Filling quantity 2.8 t |
Bulk density 0.1 t/m³ |
Filling volume 28 m³ in 6 min. |
|
Trough chain conveyor with open base plate from windsifter to the bunker (material input): |
Type TKF2 2400-11200, pos. 50 |
Centre distance 11,200 mm |
Useful width 2,400 mm |
Sidewall 800 mm |
Incline 0° |
Sheet thickness frame 4 mm |
Belt speed 0.4 m/second |
Drive motors 2 x 15 kW |
Chain type FV 140 |
Pusher height 250 mm |
|
Trough chain conveyor after dosing drum (material output): |
Type TKF2 2200 - 23150, pos. 100 |
Centre distance 23,150 mm |
1st horizontal section 4,000 mm |
2nd horizontal section 3,350 mm |
Elevating section 15,800 mm |
Useful width 2,200 mm |
Sidewall 800 mm |
Incline 60° |
Sheet thickness frame 4 mm |
Belt speed 0.4 m/second |
Drive motors 2 x 15 kW |
Chain type FV 140 |
Pusher height 250 mm |
Moving end pitch 250 mm |
|
Condition of the plant: |
The bunker was used exclusively in test operation with pre-shredded paper fractions for approx. 3,500 hours. After that, the project was discontinued and the bunker was no longer needed. |
|
Comments: |
The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. |
Please note:
- All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
- This offer is non-binding, prior sale excepted und revocable at any time.
- Inspections possible after agreement.
- The sale is ex location, as it stands and lays, without liability and guarantee.