Stadler screening drum for commercial and domestic waste, drum dim. 8,000 x 2500 mm, sieve hole diameter 50, 220 and 265 mm, with winding protection

Technical data screening drum for commercial and domestic waste:

Manufacturer Stadler Anlagenbau GmbH, Germany

Type  SDM 2500-8000

Year of manufacture 2006

Throughput capacity according to manufacturer's specifications, for typical commercial and domestic waste, approx. 90 cbm/hour

Dimensions of the drum body 2,500 x 8,000 mm (d x l)

Inclination 3°

Loading of the drum, 7 sieve plates in circumference

Material inlet 980 mm wide, (sheet metal ring without perforation, with welded-on drivers)

1st to 3rd screen plate, hole diameter 50 mm, dimensions per screen plate 1,343 x 1,110 mm (w x h)

4. to 5. screen plate, hole diameter 220 mm, with welded tube as winding protection, tube length 110 mm, dimensions screen plate 1,343 x 1,110 mm ( w x h )

6. sieve plate, hole diameter 265 mm, with welded tube as winding protection, tube length 130 mm, dimensions sieve plate 1,343 x 1,110 mm (w x h)

Material outlet 1,000 mm wide, (sheet metal ring without perforation and without driver)

Material overflow, discharge chute for oversize material, width 1,000 mm

Drive power 15 kW

Transport dimensions 12,570 x 3,750 x 3,664 mm (l x w x h)

Weight approx. 21.7 t

Remark:

The screening drum runs on four bearing blocks, each equipped with two Vulkollan rollers, approx. 500 mm diameter, width per roller 110 mm, covering thickness approx. 25 mm. For the horizontal stop, two additional rollers are mounted at the beginning and end of the drum to limit the horizontal movement.

The screening drum is already dismantled and ready for loading. Unfortunately, technical documentation on the screening drum is not available.  An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.