Windsifter Westeria, type WS2-2000, yoc 2015, only approx. 3,500 operating hours, complete with trough chain and slide belt conveyor

Technical data windsifter plant:

 

Trough chain conveyor to the windsifter (material input):

Type TKF 2 1800-17900, pos. 10

Centre distance 17,900 mm

Horizontal section 6,500 mm

Elevating section 11,400 mm

Useful width 1,800 mm

Sidewall 800 mm

Incline 60°

Sheet thickness frame 4 mm

Belt speed 0.4 m/second

Drive motors 2 x 15 kW

Chain type FV 140

Pusher height 250 mm

 

Technical data windsifter:

Manufacturer Westeria

Type WS2-2000, pos. 20

Year of construction 2015

Operating hours approx. 3,500 hours

Main dimensionen: 6,900 x 3,000 x 2,300 mm (l x w x h)

Sheet thickness housing cover 1, 5 mm

Sheet thickness frame 4 - 100 mm

Weight approx. 6 t

Exhaust air volume 17,500 m³/hour

Extraction pipe diameter 560 mm

 

Separation capacity air classifier:

Light materials such as paper, cardboard, foils, flat thin metals (t<=1.5 mm), glass parts <= 25 mm and stones <= 25 mm.

99.5 % light materials are separated from 100 % input.

 

Heavy materials such as stones >= 15 mm, metals t > 1.5 mm and glass parts > 25 mm

95 % heavy materials are separated

 

Lightweight separator:

Type LT 25, pos. 21

Dimensions 2,700 x 1,350 x 1,650 mm (l x w x h)

Drive power 2.2 kW

Perforated plate 8 mm

Max. Air flow rate 25,000 m³/hour

Pressure loss at nominal capacity 350 mbar

 

Trough chain conveyor  with open base plate to the bunker (material input):

Type TKF2  2400-11200, pos. 50

Centre distance 11,200 mm

Useful width 2,400 mm

Sidewall 800 mm

Incline 0°

Sheet thickness frame 4 mm

Belt speed 0.4 m/second

Drive motors 2 x 15 kW

Chain type FV 140

Pusher height 250 mm

 

Slide belt conveyor (accelerator belt):

Type BMF 1

Centre distance 2,900 mm

1st horizontal section 1,200 mm

2nd horizontal section 535 mm

Belt speed 2,0 up to 3,0 m/second

Drive motor 3 kW

 

Slide belt conveyor (material output)

Type BMF 1

Centre distance 5,000 mm

1st horizontal section 1,200 mm

2nd horizontal section 535 mm

Belt speed 0.8 m/second

Drive motor 3 kW

 

Condition of the plant:

The winssifter was used exclusively in test operation with pre-shredded paper fractions for approx. 3,500 hours. After that, the project was discontinued and the bunker was no longer needed.

 

Comments:

The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.