Here you will find used baling presses , channel balers, vertical balers, two-ram balers, with fully automatic or manual binding system
- Baler Avermann, type AVOS 1410 BS-22/50, 70 t press force, year of construction 2023, only 1,851 pump hours, drive 22 kW, with special press ram
- Baler Avermann, type AVOS 1410-45/80, 80 t press force, yoc 2009, only 20,536 operating hours, drive power 45 kW, with special press ram
- Baler BOA, type Impress M75-45-A-5-1.6 Ecoline, 71 t pressing force, yoc 2021, only 2658 operating hours, almost as good as new, drive 45 kW
- Baler BOA, type Impress D130.110.B.5-(5R).1.6, 127 t pressing force, yoc 2009, drive power 2 x 55 kW, with 10-fold cross tying system, with conveyor
- Baler Bollegraaf, type HBC 110 K / 75 kW, 100 t pressing force, yoc 2007, only 23,000 operating hours, drive power 75 kW, with 10-fold cross tying system
- Baler Bollegraaf, type HBC 140 K, 140 t pressing force, yoc 2012, only 18,593 operating hours, with 10-fold cross tying system and conveyors
- Baler Europress, type EP5 150 V5, 150 t pressing force, yoc 2015, only 19,173 operating hours, drive power 2 x 55 kW, with HARDOX floor an sidewalls
- Baler Klanke, type KBST 80, 80 t press force, yoc 2008, drive power 2 x 30 kW, with 4-fold horizontal binding, with defective chain belt conveyor
- Baler MACPRESSE, type 111A, 170 t pressing force, yoc 1996, drive power 2 x 55 kW, incl. chain belt conveyor and wire drawing stations, baler refurbished
- Baler MACPRESSE. type 112, 200 t press force, yoc 2002, 43,459 operating hours, drive power 2 x 75 kW, big size bale, with 5-fold horizontal tying system
- Can press, packing press unoTech, type UPAXX 70, yoc 2019, only approx. 3,000 hours, press force 70 kN, drive power 30 kW, Package dim. 250 x 500 mm
- Baler Presona, type LP 50 EH1, 50 t pressing force, yoc 2005, nur 30,408 operating hours, drive power 22 kW, with 5-fold vertical tying system
- Baler Presto, type CC 36 M, 36 t pressing force, yoc 2010, only 3,641 operating hours, drive power 15 kW, with 4-fold vertical tying, with Polyester yarn
- Baler Riko Ekos, type S-60K (5), 60 t pressing force, yoc 2019, only 673 operating hours, drive power 37 kW, with 4-fold horizontal tying system
- Baler Riko Ekos, type S-60K (6), 60 t pressing force, yoc 2019, only 2,320 operating hours, drive power 37 kW, with 4-fold horizontal tying system
- Baler unoTech, type 120 V5, 120 t cutting force, yoc 2009, drive power 2 x 75 kW, the baler was overhauled and tested
- EPS (polystyrene) press FZ-Recycling GmbH & Co. KG, type FZR 320, yoc 2022, connected load 12.6 kW, with pre-shredder, press is for mobile use
We offer used balers from renowned manufacturers such as Avermann, Bollegraaf, BOA, Europress, HSM, MACPRESSE, Paal, Presona, Presto, Strautmann, Unotech, etc. The machines can be purchased in the current condition (without guarantee) or repaired, if desired also completely overhauled with guarantee. Our workshop will also be pleased to carry out overhaul work according to your wishes and will take care of the transport for you, including installation and commissioning. Challenge us, OBM Recycling Machinery B. V. is your reliable partner when it comes to used recycling technology.