Baler ANIS, type ATS110-75-9CT, press power 74 tons, only 938 working hours, drive power 30 kW, incl- 9 fold cross tying system and two pre-press flaps

Technical data baler

Manufacturer  ANIS Trend d.o.o.

Typ ATS110-75-9CT

Year of construction 2011

Hours of operation 938 hours, stand January 2021

Quantity of pressed bales 4,959 pieces

Press power main press 74 tons

Specific press capacity 87 N/cm²

Pre-press flaps 2 pieces, 1,600 x 420 mm, each arranged left and right

Feed channel 1,600 x 1,200 mm

Filling volume presschamber 2,2 m³

Capacity per cycle time 1,84 m³

Theoretic cycle time 22 seconds

Cycle time under operating conditions 40 seconds

Theoretic  throughput capacity 123 m³/hour

Bale size 1,100 x 770 mm, lenght variable

Drive power 30 kW

Tying system 5-fold vertical, 4 fold-horizontal, fully automatic

Throughput  capacity at a

bulk weight of 30 kg/cbm approx. 3 up to 4 tons/hour

Bale weight  with a bale length of approx. 1.2 m approx. 420 kg/bale, depends on material

Filling volume hydraulic oil tank 600 l

SPS controller Siemens S3-313

Operating panel Siemens Touch Screen TP 177A

Baler dimensions built up with hopper 9,700 x 3,700 x 3,640 mm (l x w x h)

Effektive transport dimensions only baler 9,700 x 2,300 x 2,800 mm (l x w x h)

Transport weight baler approx. 24 tons

Condition of the baler

The machine will be used until mid-March by a plastics processing company that only presses clean film edge trim from production with the machine. With only 938 operating hours, the press is in really good condition and can be used again immediately.  Due to the two laterally installed prepress flaps, in combination with the 9-fold cross binding system, the press is particularly suitable for vulominous and expansive materials such as loose cartons, films, PET bottles, PE/PP bottles, plastic buckets, canisters, etc.

Scope of delivery for the baler (feed hopper, intermediate hopper, wire drawing stations, bale chute, spare parts, etc.)

Baler with 4 pcs. wire rolls racks for 40 kg rolls (without wire) and feed hopper.

Comments:

The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.