Baler Avermann Avos BP 1411-45-80, press power 80 tons, yoc 1997, 2020 overhauled and tested, drive power 45 kW, only 9,010 hours

Technical data of the overhauled baling press

Manufacturer Avermann

Typ  AVOS BP 1411-45-80

Year of construction 1997 / overhauled in 2020

Hours of operation 9,010 hours

Press power 80 tons

Press force free-stamper 15 tons

Feed channel 1,400 x 1,100 mm (l x w)

Theoretic throughput rate 250 m³/hour

Bale size 1,100 x 700 mm (w x h, length variable)

Driving motor 45 kW

Tying system 4-fold vertical, fully automatic

Throughput rate approx. 8 up to 10 tons/hour, depends on material

Bale weight 350 up to 550 kg, depends on material

Machine weight baler approx 16 tons

 

Additional equipment:

Cutting edges free stemper, oil cooler and oil heater

 

The following overhaul work was carried out:

-        Machine cleaned, derusted, new painted

-        Hydraulic oil tank completely emptied and cleaned

-        Hydraulic oil filter and air filter renewed

-        New hydraulic oil filled in

-        Both main hydraulic cylinders, the cylinder from the press channel and the cylinder from the cutter disassembled and completely disassembled

-        A piston rod and a cylinder tube of a main hydraulic cylinder and the piston rod of the cylinder of the press channel have been renewed

-        All cylinders are equipped with new sealing kits and tested and approved for tightness at 350 bar test pressure

-        All hydraulic hoses have been renewed and partly equipped with an abrasion protection jacket

-        Slide surfaces in the frame for the two main hydraulic cylinders cleaned, derusted and plastic sliders planned

-        Some valves have been resealed at the hydraulic block

-        Plastic sliding plate above the press ram was renewed

-        The counter blades in the frame were renewed

-        The binding system with the needles and drillers was dismantled, disassembled, cleaned, made common and greased

-        The wire knife was dismantled, made common and greased

-        Some proximity switches and sensors were renewed

-        The display of the control unit has been renewed

-        The press was tested after the overhaul

 

Comments:

A inspection under power, without material usage, is possible by arrangement.  We will not assume liability for the given technical data and possible errors.

 

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.