Baler Avermann, type 141K-15-50, yoc 2007, only 6,842 operation hours, press force 50 tons, drive power 15 kW, incl. slide belt conveyor Avermann GGF 1200

Technical data baler

Manufacturer Avermann

Type 141K-15/50

Year of manufacture 2007

Operating hours 6,842 hours, stand November

Press force main press 50 tons

Specific pressing force 60.6 N/cm²

Dimensions of feed chute 1,400 x 1,000 mm (l x w)

Theor. cycle time 42 seconds

Theoretical throughput capacity 99 m³/hour

Bale dimensions 1,100 x 750 mm (W x H), adjustable length

Drive power 15 kW

Connected load, total 19 kW

Current consumption, total 63 A

Manual tying system, 4-fold vertical, 3-fold horizontal, preferably with "quicklings" (wire loops pre-cut to length).

Throughput rates with a

bulk density of 35 kg/cbm approx. 2 tons/hour

bulk density of 60 kg/cbm approx. 3 tons/hour

Bulk density of 100 kg/cbm approx. 4.5 tons/hour

Bale weights at a bale length of approx. 1.2 m up to 600 kg, depending on the material

Filling volume hydraulic oil tank approx. 450 l

SPS control Siemens SIMATIC S7-200

Transport dimensions press 7,200 x 2,200 x 2,350 mm (l x w x h)

Transport weight press approx. 10 tons


Additional equipment

The press floor is equipped with replaceable, wear-resistant 15 mm thick steel sheet plates made of NAXTRA 70. In the press channel 4 material retainers are installed to optimise the pressing of strongly expanding materials.


Condition of the baler

Press and conveyor belt are still assembled, connected to electricity and ready for operation. The cylinders are tight and show no leaks. Some welding seams have been re-welded at the press channel. The hydraulically operated door at the end of the press channel (counter press plate) opens and closes without any problems. The machine is immediately ready for operation.


Scope of delivery

Baler with slide belt conveyor


Technical data for the conveyor belt

Manufacturer Avermann

Type GGF 1200

Year of construction 2013

Drive power 3 kW

Length of ascending conveyor 7.000 mm

Gooseneck length 1,000 mm

Pitch 32°

Effective width 1.200 mm



The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.