Baler BOA Impress D130-75-B-5HR-1.6, press power 127 t, yoc 2007, drive power 2 x 55 kW, big size 1.100 x 1.100 mm incl. 5-fold horizontal binding system

Technical data baler





Impress D130-75-B-5HR-1.6

Year of construction


Hours of operation

72,291 hours, stand March 2019

Press power main press

127 tons

Specific press capacity

10,5 kg/cm²

Working pressure

280 bar

Feed channel

1,620 x 1,000 mm (l x w)

Press volume / cycle

4,1 cbm

Throughput rate under operating conditions

Up to 865 cbm/h

Cycle time under operating conditions

22 sec.

Press stroke

2,900 mm

Bale size

1,100 x 1,100 mm (w x h) length adjustable

Driving motor

2 x 55 kW

Connected load

140 kW

Tying system

5-fold horizontal, fully automated

Throughput rate at a


bulk weight of 30 kg/cbm

approx. 17 tons/h

bulk weight of 50 kg/cbm

approx. 29 tons/h

bulk weight of 100 kg/cbm

approx. 37 tons/h

bulk weight of 150 kg/cbm

approx. 51 tons/h

Bale weight

until 1,200 kg

Volume hydraulic oil tank

2,100 L

SPS controller (manuf., type)

Siemens S 7

Operating panel (manuf., type)

Siemens Touchscreen

Machine weight baler

approx. 52 tons



Condition of the baler:

The press was in use in a cardboard production plant until the end of December 2019 and was then replaced by a new press. The maintenance of the press is exemplary. The condition despite the mileage is excellent. In July 2019 the main hydraulic cylinder was replaced. In the meantime the press has been dismantled and stored. The machine is therefore available at short notice.




The machine can be inspected after agreement.  We will not assume liability for the given technical data and possible errors.


Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.