Baler BOA, type Impress D130-110-A-5/3-1.9, press power 127 tons, drive power 2 x 55 kW, yoc 2010, only 60,980 hours, with 5-fold vertical tying system

Technical data baler:

Manufacturer BOA

Type Impress D130-110-B-5-1.9

Year of construction 2010

Hours of operation 60,980 hours, stand January 2022

Press power main press 127 tons

Specific press capacity 10,5 kg/cm²

Working pressure 280 bar

Feed channel 1.920 x 972 mm (l x w)

Press volume / cycle 4,1 cbm

Volume throughput without load up to 865 cbm/hour

Cycle time under operating conditions 22 sec.

Press stroke 2.900 mm

Bale size 1.100 x 1.100 mm (w x h) length adjustable

Driving power 2 x 55 kW

Connected load 132 kW

Tying system 5-fold vertical, fully automated

Throughput rate at a

bulk weight of 30 kg/cbm up to 17 to/h

bulk weight of 50 kg/cbm up to 29 to/h

bulk weight of 100 kg/cbm up to 37 to/h

bulk weight of 150 kg/cbm up to 51 to/h

Bale weight up to 1.200 kg

Volume hydraulic oil tank 2.100 L

SPS controller  Siemens S 7

Operating panel  Siemens Toughscreen Multi Panel

Transport dimensions baler approx 12.741 x 2.400 x 3.360 mm (l x w x h)

Machine weight baler approx. 42 tons

Comments:

The machine will be in operation at a paper mill until around September 2022, when it will be replaced by a new press. To ensure high availability in production, the press is shut down and serviced for half a day every week. The condition of the machine is exemplary!  An inspection is possible by appointment. We do not accept any liability for the technical specifications or any errors.