Baler Bollegraaf HBC 120 K, yoc 2008, only 11,615 operation hours, press power 120 tons, drive power 90 kW, 8-fold cross tying system, incl. chain belt conveyor

Technical data baler:

Manufacturer Bollegraaf

Typ HBC 120 K

Year of construction 2008

Working hours 11,615 hours, stand August 2021

Press power main press 120 tons

Press power of pre-press 70 tons

Feed channel 1,600 x 1,100 mm

Capacity per cycle time 3,15 m³

Theoretic cycle time 19 sec.

Bale size 1,100 x 720 mm

Driving motor 90 kW

Connected load 169 kW

Full load current 318 A

Tying system 5-fold vertical, 3-fold horizontal, fully automated

Throughput rate at a

bulk weight of 30 kg/cbm approx. 24 tons/h

bulk weight of 50 kg/cbm approx. 33 tons/h

bulk weight of 100 kg/cbm approx. 50 tons/h

Bale weight 600 up to 1100 kg, depends on material and bale lenght

SPS controller (manuf., type) Telemecanique TSX Micro

Operating panel (manuf., type) Schneider MAGELIS Touch

Baler dimensions built up with hopper 11,750 x 5,500 x 6,894 mm (l x w x h)

Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h)

Machine weight baler approx. 40 tons


Special equipment:

3-fold horizontal binding

Press room covered with wear-resistant HARDOX sheets

2-flap pre-compressor for large cardboard boxes and octatainers

Wirbulator for magazines and books

Foil valve for pressure relief

Variable duct pressure control

Armoured cable ducts against rat damage

Remote control


Technical data chain belt conveyor

Manufacturer Bollegraaf

Typ HBT 1200/2000

Year of construction 2008

Driving motor 7,5 kW

Length feeding conveyor 8,300 mm

Length elevating conveyor 13,100 mm

Length goose neck 1,400 mm

Grade 30°

Effecting width 2,000 mm

Height of side wall feeding conv. 500 mm

Height of side wall elevating conv. 800 mm

Weight 16 t



The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2022. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.