Baler Bollegraaf, type HBC 110 K, 100 t pressing force, yoc 1994, 42,650 operating hours, drive power 2 x 30 kW, big size bale 1,100 x 1,100 mm

Technical data baler:

Manufacturer Bollegraaf

Typ HBC 110 K

Year of construction 1994

Operating hours 42,.650 hours, stand September 2022

Press power main press 100 tons

Press power of pre-press 50 tons

Feed channel 1,600 x 1,100 mm

Filling volume 3,15 m³

Theoretic cycle time 19 sec.

Bale size 1,100 x 1,100 mm, lenght variable

Drive power 2 x 30 kW

Tying system 5-fold, vertical, fully automatic

Throughput capacity at a

bulk weight of 30 kg/cbm approx. 16 tons/hour

bulk weight of 50 kg/cbm approx. 25 tons/hour

bulk weight of 100 kg/cbm approx. 47 tons/hour

Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material

Filling volume hydraulic oil tank 1,200 l

SPS controller (manuf., type)  Telemecanique TSX 47

Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h)

Transport weight baler 38.5 tons

Condition of the baler:

The machine was exchanged for a new press out of running operation and transported away. The baler is immediately available. The press ram is prepared for the installation of an optional horizontal binding, but this was never purchased. The binding is 5-fold vertical.

Scope of delivery:

Exclusively the baler, as shown in the photos.

Comments:

An inspection is possible by appointment. We assume no liability for the technical specifications and any errors.