Baler Bollegraaf, type HBC 140, press power 140 tons, drive power 2 x 75 kW, yoc 2002, with pre-compressor and ruffler

Technical data baler:

Manufacturer Bollegraaf

Type HBC 140

Year of construction 2002

Working hours 52,836, stand March 2022

Press power main press 140 tons

Press power of pre-press 70 tons

Feed channel 1,600 x 1,100 mm (l x w)

Capacity per cycle time 4,34 cbm

Theoretic cycle time 16 sec.

Bale size 1,100 x 1,100 mm (w x h), length adjustable

Driving motor 2 x 75 kW

Connected load 209 kW

Tying system 5-fold vertical, fully automated

Throughput rate at a

bulk weight of 30 kg/cbm approx. 30 tons/h

bulk weight of 50 kg/cbm approx. 46 tons/h

bulk weight of 100 kg/cbm approx. 82 tons/h

Bale weight 850 up to 1.500 kg

Hydraulicoil 2.400 l

Baler dimensions with conveyor built up with hopper approx.13,200 x 21,000 x 7,457 mm (l x w x h)

Transport dimensions only baler approx.13,200 x 2,750 x 3,450 mm (l x w x h)

Machine weight baler approx. 47 tons

Condition:

The press is in a operational condition, dismantled, stored and available at short notice.

Additional equipment:

Between the discharge of the conveyor belt and the press, the press line is equipped with an optional pre-compressor and a ruffler. The pre-compressor consists of two laterally mounted pre-compression flaps that compress and thus pre-compress the material in front of the chute in the press, especially with large cardboard boxes and octatainers. This prevents blockages and offers a higher material throughput with large-format cartons. The Wirbulator is mainly used to loosen up and distribute newspapers, magazines, books, etc. in order to create optimum compaction and dimensional stability of the bales.

Scope of delivery:

Press with pre-compactor and ruffler

Comments:

The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.