Baler Lindemann, type BIGRO 1020, 100 t pressing force, incl. bale opener / carton ripper and complete conveyor technology into the baler

Technical data baler:

Manufacturer Lindemann

Type BIGRO 1020

Pressing force main press 100 t

Specific pressing force 12.12 kg/cm²

Pressing force free rammer 24 tonnes

Chute dimensions 1,040 x 1,400/2,000 mm

Bale dimensions 830 x 1100 mm (h x w), variable length

Drive power of baler 2 x 55 kW

Wirbulator drive power 11 kW

Tying 4-fold vertical, fully automatic

Throughput rates with a bulk weight of

bulk density of 20 to 30 kg/cbm approx. 10 tonnes/hour

Bulk density from 40 to 60 kg/cbm approx. 18 tonnes/hour

Bulk weight from 70 to 100 kg/cbm approx. 28 tonnes/hour

Throughput volume in single-shift operation in 2021: 15,760 tonnes

Filling volume of hydraulic oil tank 2,250 litres

Transport weight of press approx. 30 tonnes



Additional equipment on the baler:

Free rammer in front of the counter blade with 24 t pressing force

Hardox base plate, bolted, exchangeable

Wirbulator, drive power 11 kW



Condition of the baler:

The machine has been well maintained and repaired time and again. The main hydraulic block has been renewed. The seals of all cylinders have been replaced. The machine is in good condition for its age and produces approx. 15,000 tonnes per year in single-shift operation. The entire pressing plant is to be replaced in June with a new plant with a higher throughput capacity and will then be available for sale.



Technical data for the bale breaker / cardboard ripper:

Manufacturer Lindemann

Type PC 1000/1650

Drive power 55 kW

Rotor speed approx. 750 rpm

Rotor weight approx. 1573 kg



Scope of delivery:

Feed conveyor belt for Lindemann bale opener / carton ripper

Lindemann bale opener / carton ripper, type PC 1000/1650

Discharge conveyor belt to the press

Feed conveyor to the baler

Baler Lindemann, type BIGRO 1020




All documentation (operating instructions, electrical and hydraulic circuit diagrams) is available in German. The CE declaration was subsequently created for the complete pressing system and is also available in German. Various new spare parts such as pumps, wear parts, seal kits etc. can be purchased at an additional cost.


An inspection of the system during operation is possible by arrangement. We accept no liability for the technical details or any errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.