Baler Paal Likon 600, press power 120 tons, yoc 1990 / 2005 completely overhauled by Paal, drive power 2 x 55 kW, incl. chain belt conveyor

Technical data baler

 

Manufacturer

Paal

Typ

Likon 600

Year of construction

1990 / 2005 completely overhauled at the manufacturer Paal

Hours of operation

53,461 hours

Press power

120 tons

Feed channel

2,000 x 1,020 mm (l x w)

Capacity per cycle time

2,6 cbm

Throughput at idle speed

650 m³/hour

Throughput capacity under operating conditions

430 m³/hour

Bale size

1,100 x 1,100 mm (w x h) length adjustable

Driving motor

2 x 55 kW

Capacity of main pumps

2 x 360 l/min.

Drive power ruffler

11 kW

Connected load

150 kW

Tying system

5-fold horizontal, fully automated

Volume hydraulic oil tank

3,100 L

Transport dimensions only baler

approx. 14.773 x 2.642 x 3.555 mm (l x w x h)

Machine weight baler

approx. 42 tons

 

 

Condition of the baler:

The press shows strong wear marks and is in need of repair. The hydraulic block is cracked and loses oil. The press must be overhauled before being used again or can be used as a spare part dispenser.

 

 

Additional equipment :

With ruffler, automatically retractable into different positions, drive power 11 kW.

 

 

 

Technical data conveyor belt

 

Manufacturer

Paal

Typ

KES 1900

Year of construction

2005

Driving motor

 7,5 kW

Belt speed

 0,29 m/sec.

Length feeding conveyor

 9.060 mm

Length elevating conveyor

 10,250 mm

Length goose neck

 2,000 mm

Grade

 28°

Effecting width

 1,900 mm

Height drive axle over ground

 5,147 mm

Height of side wall feeding conv.

 527 mm

Height of side wall elevating conv.

 1,027 mm

Installation dimensions press incl. conveyor belt

14,773 x 25,695 x 6,055mm (l x w x h)

Transport dimensions over all

 22,250 x 2,400 (l x w)

Pit dimensions

13,000 x 3,100 x 1,050 mm (l x w x d)

 

 

Remarks:

The press is sold together with the conveyor belt, a bale slider and two wire stations ex location Netherlands. The buyer is responsible for dismantling and loading.  The documentation (Manual, CE, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

 

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.