Baler Presto CC 40 V, press power 40 tons, yoc 2012, drive power 15 kW, only 6,924 working hours, incl. shredder and lifting and tilting device

Technical data baler

Manufacturer Presto GmbH & Co. KG

Typ CC 40 V

Year of construction 2012

Hours of operation 6,924 hours

Press power main press 40 tons

Specific press capacity 48,5 N/cm²

Feed channel 1,080 x 1,100 mm

Capacity per cycle time 0,85 m³

Theoretic cycle time 34 sec.

Theoretic  throughput rate 90 m³/hour

Throughput capacity under operating conditions 72 m³/hour

Sound pressure level in operation (LpA) 65 dB

Bale size 750 x 1,100 mm

Bale weight up to 400 kg, depending on material

Driving motor 15 kW

Total connected load 400 V, 50 Hz, 15 kW

Back-up fuse 35 A, slow blow fuse according to DIN 49462/63

Tying system 4-fold vertical, fully automatic

Throughput rate at a

bulk weight of 35 kg/cbm up to 2,5 tons/hour

bulk weight of 60 kg/cbm  up to 4 tons/hour

bulk weight of 100 kg/cbm  up to 5,9 tons/hour

SPS controller (manuf., type) Siemens S7/300

Operating panel (manuf., type) Siemens Touch Panel

Space required when assembled 5,600 x 3,150 mm (L x W)

Transport dimensions only baler 3,650 x 1,590 x 2,210 mm (l x w x h)

Machine weight baler approx. 4,2 tons

 

Technical data cardboard shredder

Manufacturer Presto

Type PZA

Year of construction 2012

Throughput volume 130 m³/hour

Speed 37/9 rpm

Motor power 7,5 / 2,2 kW

Electrical connection 32 A

Dimensions 2,205 x 1,320 x 680 mm (L x W x H)

Machine weight 0,45 tons

 

Technical data Lifting-/tilting device according to DIN EN 840 part 1 - 4

Manufacturer Presto GmbH & Co. KG

Type hebe-KV

Year of construction 2012

Length 2.500 mm

Width 2.330 mm

Overall height 6,100 mm

Dumping height 4,900 mm

Drive power 3 kW

Connected load 400 V, 50 Hz, 2.2 kW

Rated current 6.6 A

Electrical connection 16 A

Machine weight 1,200 kg

 

Use of the system

The complete system was in operation in a German logistics centre until the end of 2019, pre-shredding loose cartons from the returns department as well as paper and cardboard in boxes and pressing them into bales. On one side, the bales were fed as loose cartons, which were moved by hand onto the feeding belt directly to the shredder and into the press. The second task was carried out by means of bins, which were emptied onto a second infeed belt via the lifting/tipping device. 

 

Scope of delivery

Presto baler CC 40 V incl. feed hopper

Presto cardboard shredder (2-shaft shredder) type PZA

Presto lifting/tilting device, type Hebe-KV

Feed belt from the lift-tilting device (sliding belt conveyor)

The second infeed belt Manual feeding (sliding belt conveyor) is not available and is therefore not included in the scope of delivery.

 

Condition of the plant:

The system is currently being overhauled and then tested with material. We grant a parts guarantee of 6 months, wearing parts are excluded. By parts guarantee we mean that defective parts are dismantled by the buyer and sent to the seller. The seller repairs the defective parts or sends new parts to the buyer. The buyer reinstalls the parts. Costs for disassembly and assembly are borne by the buyer. The seller is not liable for downtime or consequential damages. 

 

Comments:

The documentation (Manual, CE, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

 

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.