Big hydraulic oil tank with oil preheating for winter and big oil cooler for continuous operation of the machine
Drive power 2 x 75 kW
Hydraulic block mounted directly on the main cylinder, for short control times and flow-optimised oil flow
Drive 2 x 75 kW with individually controllable axial piston pumps, for maximum power yield at variable volume flow rate
Dimensions of the feeding chute 2,000 x 1,020 mm (l x w)
Pressstamp 1,100 x 750 mm (w x h) for 5-fold vertical binding
Counter knife in frame manufactured in segmented design, individually exchangeable, press power free stamper 25 tons
Press channel side walls, base and cover in good condition
Upper wear rails in highly tempered tool steel, segmental design, individually reversible and exchangeable
Both side walls are in good condition
Base plate made of wear-resistant Hardox steel, screwed, exchangeable, in good condition
The main hydraulic cylinder is tight and in good condition
The lower rollers and the upper guide rollers are in good condition
Siemens S7-300 control with Siemens SIMATIC control panel
Rubber belt, traverses, running rails and the chain of the chain belt conveyor KTH 1700 are in good condition
Overview chain belt conveyors, infeed belt 6,000 mm, ascending belt 10,233 mm, gooseneck 1,500 mm, effective width 1,625 mm

Baler unoTech GmbH, type 120 V5, press power 100 tons, yoc 2009, drive power 2 x 75 kW, incl. chain belt conveyor and wire stations

Technical data baler:

Manufacturer  unoTech GmbH, Niederlangen, Germany

Typ 120 V5

Year of construction 2009

Press force main press 100 tons

Specific press force 145 N/m²

Max. cutting force 120 tons

Press force free stamper 25 tons

Feed channel 2,000 x 1,020 mm (l x w)

Capacity per cycle time 1,5 m³

Theoretic throughput rate 650 m³/hour

Bale size 1,100 x 750 mm (w x h)

Driving motor 2 x 75 kW

Connected load 160 kW

Rated current 280 A

Tying system 5-fold vertical, fully automatic

Throughput rate at a

bulk weight of 20 to 30 kg/cbm up to 15 tons/hour

bulk weight of 35 to 50 kg/cbm  up to 23 tons/hour

bulk weight of 60 kg/cbm  up to 27 tons/hour

bulk weight of 100 kg/cbm  up to 44 tons/hour

Bale weight 600 up to 900 kg, depends on material

SPS controller (manuf., type) Siemens S7 300

Operating panel (manuf., type) Siemens SIMATIC

Baler dimensions built up with hopper 20,000 x 23,000 x 6,190 mm (l x w x h)

Transport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h)

Machine weight baler approx. 37 tons

Accessories 4 wire stations for a total of 10 pieces 500 kg wire coils (wire not included in the sales volume)

 

Condition of the baler:

The baler was operated almost exclusively with paper and cardboard, therefore the low wear and tear. The machine has been serviced regularly and is in a really good condition, ready for operation and need not fear any comparison. Uncompromising quality from Germany with unique technical refinements distinguish this baler "made by unoTech".

 

Comments:

The documentation (Manual, CE, electr./hydr.-drawings), are completely available. An inspection during operation is possible by appointment. We will not assume liability for the given technical data and possible errors.

 

Technical data conveyor belt:

Manufacturer unoTech

Typ KTH 1700

Year of construction 2009

Driving motor 5,5 kW

Length feeding conveyor 6,000 mm

Length elevating conveyor 10,233 mm

Length goose neck 1,500 mm

Grade 30°

Effecting width 1,625 mm

Height of side wall feeding conv. 500 mm

Height of side wall elevating conv. 1,000 mm

Transport dimensions over all

Feeding conveyor 7,000 x 2,200 x 1,200 mm (l x w x h)

Elevating conveyor 13,600 x 2,200 x 1,500 mm (l x w x h)

Pit dimensions (Conveyor belt) 10,650 x 2,125 / 3,640 mm x 1,200 mm ( l x w x h)

 

Condition of the conveyor belt:

The running rails, chains and the rubber belt are in a good and immediately operational condition.

 

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.