Baler BOA, type D225-165-D-5V/5H-1.6, 211 t pressing force, yoc 2022, only 1,568 operating hours, drive power 3 x 45 kW, with 10-fold cross tying system

Technical data baler:

Manufacturer BOA Recycling Systems B.V.

Type Impress D225-165-D-5V/5H-1.6

Year of manufacture 2022

Operating hours 1,568 hours, as of June 2023

Pressing force main press 2,211 kN or 211 t

Specific pressing force 17.5 kg/cm²

Working pressure 280 bar

Press stroke main hydraulic cylinder 2,900 mm

Average cycle time 23 seconds

Dimensions of feed chute 1,620 x 972 mm

Volume of press chamber 4.4 m³

Bale dimensions 1,100 x 1,200 mm, length variable

Drive power 3 x 45 kW

Total connected load 250 kW, 500 A

Tying system 5-fold vertical, 5-fold horizontal, fully automatic

Throughput rates with a

bulk density of 30 kg/cbm up to 20 t/hour

Bulk density of 60 kg/cbm up to 33 t/hour

Bulk density of 100 kg/cbm up to 46 t/hour

Bulk density from 150 kg/cbm up to 56 t/hour

Bulk weight from 200 kg/cbm up to 69 t/hour

Bale weights up to 1300 kg, depending on material

Hydraulic oil tank capacity 2,700 L

PLC control (manufacturer, type) Siemens S7-1500

Operating panel (manufacturer, type) Siemens Multi Touch Panel

Machine weight press approx. 68 t

Noise level <85 dB(A)

Installation dimensions of baler with bale chute and feed hopper 16,901 x 5,400 x 7,780 mm (l x w x h)

Required hall floor space incl. maintenance areas around the machine 20,000 x 8,500 mm (l x w)

Special equipment:

Hardox floor panels and side panels

Oversized bale dimensions 1,100 x 1,200 mm, variable length

Separately switchable 5-fold horizontal binding, so that the bale can be pressed and tied with a 10-fold cross binding even the most expansive materials in a dimensionally stable way

Remote control with LED screen

Heating in the oil tank for winter operation

Ecoline version (particularly energy-saving)

Refu ram

Ixon modem connection for remote maintenance

Scope of delivery:

1 piece baler

1 piece chute

1 piece bale slider

20 pieces wire reel stands

8 pcs. wire draw frames, 4 pcs. with 2 wire deflectors, 4 pcs. with 3 wire deflectors

1 piece switch cabinet

1 piece machine documentation (operating instructions, CE declaration of conformity, electrical circuit diagrams, hydraulic circuit diagrams, installation drawings)

Comments:

The machine is currently still in operation and can be inspected with the use of material. An exchange of the press, possibly even with the associated conveyor technology, can still be negotiated in detail. The documentation (BA, CE, electrical/hydraulic circuit diagram) is completely available. An inspection is possible by arrangement. We do not assume any liability for the technical data and possible errors.