Baler Bollegraaf, type HBC 140, press power 140 tons, drive power 2 x 75 kW, yoc 2002, with chain belt conveyor, pre-compressor and ruffler

Technical data baler:

Manufacturer Bollegraaf

Type HBC 140

Year of construction 2002

Working hours 52,836, stand March 2022

Press power main press 140 tons

Press power of pre-press 70 tons

Feed channel 1,600 x 1,100 mm (l x w)

Capacity per cycle time 4,34 cbm

Theoretic cycle time 16 sec.

Bale size 1,100 x 1,100 mm (w x h), length adjustable

Driving motor 2 x 75 kW

Connected load 209 kW

Tying system 5-fold vertical, fully automated

Throughput rate at a

bulk weight of 30 kg/cbm approx. 30 tons/h

bulk weight of 50 kg/cbm approx. 46 tons/h

bulk weight of 100 kg/cbm approx. 82 tons/h

Bale weight 850 up to 1.500 kg

Hydraulicoil 2.400 l

Baler dimensions with conveyor built up with hopper approx.13,200 x 21,000 x 7,457 mm (l x w x h)

Transport dimensions only baler approx.13,200 x 2,750 x 3,450 mm (l x w x h)

Machine weight baler approx. 47 tons


Technical data conveyor belt:

Manufacturer Bollegraaf

Typ HBT 1200/2000 * 20.096 35°/10°

Year of construction2002

Driving motor 7,5 kW

Length feeding conveyor 6,279 mm

Length elevating conveyor 12,428 mm

Length goose neck 1,389 mm

Grade 35°

Effecting width 2,000 mm

Height of side wall feeding conv. 500 mm

Height of side wall elevating conv. 800 mm

Pit dimensions for conveyor belt 8,650 x 2,850 x 1200 mm (l x w x d)



The press with conveyor belt is in good, operational condition, still in production until approx. the end of May and will then be replaced with a new press.


Additional equipment:

Between the discharge of the conveyor belt and the press, the press line is equipped with an optional pre-compressor and a ruffler. The pre-compressor consists of two laterally mounted pre-compression flaps that compress and thus pre-compress the material in front of the chute in the press, especially with large cardboard boxes and octatainers. This prevents blockages and offers a higher material throughput with large-format cartons. The Wirbulator is mainly used to loosen up and distribute newspapers, magazines, books, etc. in order to create optimum compaction and dimensional stability of the bales.


Scope of delivery:

Press with pre-compactor, ruffler, conveyor belt, two wire drawing stations for 5 wire rolls each (without wire) and bale slider.



The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available.  Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.