Baler Bollegraaf, type HBC 50, 55 t pressing force, yoc 1990, drive power 30 kW, incl. feeding and elevating conveyor, wire pulling stations, bale slider

Technical data baler:

Manufacturer Bollegraaf

Typ HBC 50

Year of construction 1990

Operating hours are not known, no operating hours counter is available

Press power main press 55 tons

Specific press capacity 6,25 kg/cm²

Press power of pre-press 25 tons

Feed channel 1,320 x 1,100 mm

Capacity per cycle time 2,45 m³

Theoretic cycle time 30 sec.

Bale size 1,100 x 720 mm, lenght variable

Drive power 30 kW

Tying system 5-fold, vertical, fully automatic

Throughput  capacity at a

bulk weight of 20 kg/cbm approx. 5,5 tons/hour

bulk weight of 50 kg/cbm  approx. 5,5 tons/hour

bulk weight of 100 kg/cbm  approx. 5,5 tons/hour

Throughput capacity with ruffler  approx. 5,5 tons/hour

Bale weight  with a bale length of approx. 1.2 m approx 380 up to 750 kg

Filling  volume hydraulic oil tank 500 l

SPS controller (manuf., type)  Telemecanique TSX 17

Effektive transport dimensions only baler 9,800 x 2,100 x 2,850 mm (l x w x h)

Transport weight baler approx 19 tons

 

Condition of the baler:

The press with conveyor technology was used by a small recycling company in Germany for pressing paper, cardboard and foils. The complete plant is still connected to electricity, ready for immediate operation and can be inspected on site during operation. The pressing of paper has been discontinued, therefore the complete plant is for sale. Dismantling and loading is the responsibility of the buyer. If desired, this service can be offered in addition to the purchase price.  For removal, a Megaliner is needed for the baler with an internal height of 3,000 mm and a normal tarpaulin trailer for the sliding belt conveyors and the attachments to the baler.

 

Scope of delivery:

Feeding conveyor belt (sliding belt conveyor)

Ascending conveyor (sliding belt conveyor)

Feed hopper with maintenance platform and access ladder

Intermediate hopper from the feed hopper to the baler

Baler

Bale slider

Two wire pulling stations for 5 wire rolls, without wire

 

Technical data for the conveyor belt:

Manufacturer, type and year of construction are not known. There are two separate sliding belt conveyors, one feeding belt and one ascending belt.

Length feeding conveyor 5,000 mm

Length elevating conveyor 9,000 mm

Effecting width 1,200 mm

 

Comments:

The documentation (Manual, electr./hydr.-drawings), are completely available for the baler. Inspections are possible after agreement.  We will not assume liability for the given technical data and possible errors.

Please note:

  • All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors.
  • This offer is non-binding, prior sale excepted und revocable at any time.
  • Inspections possible after agreement. 
  • The sale is ex location, as it stands and lays, without liability and guarantee.