Baler BRAMIDAN, type HC 50, 50 t pressing force, yoc 2007, only 11,970 operating hours, drive power 15 kW, with 4-fold vertical tying system

Technical data baler:

Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG)

Type HC 50 (formerly HPK 50 BK)

Year of manufacture 2007

Operating hours 11,970 hours, as of March

Pressing force 50 tonnes

Specific pressing force 650 kN/m²

Feed chute dimensions 1250 x 1050 mm (L x W)

Filling volume 0.96 cm³

Theoretical cycle time 32 seconds

Theoretical throughput capacity 108 m³/hour

Bale dimensions 1100 x 700 mm (w x h) length variable

Drive power 15 kW

Power consumption, total in 50 A

Tying 4-fold vertical, fully automatic

Throughput rates with a

bulk density of 30 kg/cbm approx. 3.1 t/hour

Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour

Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour

Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material

Hydraulic oil tank capacity 400 litres

PLC control Siemens S7-200

Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h)

Transport weight of press 8.5 tonnes

Condition of the baler:

The press is currently still in use in a production plant and has been regularly serviced. With only 11,970 operating hours, the machine has run very little. Only cartons from the goods receiving and production departments were pressed. The machine is in good, operational condition for its age and will soon be replaced by another pressing system.

Scope of delivery:

1 baler with wire roll boxes, without wire

1 piece feed hopper with two discharge areas

1 set of machine documentation